Steel Cord Conveyor Belt China Conveyor Belting Manufacturer

• Customization: Available
• Type: Steel Cord Conveyor Belt
• Material: Rubber
• Model NO.: ST1000
• Inside Material: Steel Cord
• Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant, Flame-Resistant
• Tensile Strength: Strong
• Width: 1000mm
• Steel Cord Diameter: 4.0mm
• Top Cover: 6mm
• Bottom Cover: 6mm
• Transport Package: PVC Seaworthy Plastic Film
• Specification: 200Meters/Roll
• Trademark: HANBELT
• Origin: Shandong, China
• HS Code: 401011
• Production Capacity: 3600meters/Day

Product Description

STEEL CORD CONVEYOR BELT 
 

steel cord conveyor belt Structure:  High strength and low elongation galvanized steel wire rope is used as tensile body, and flame-retardant and antistatic high-quality covering compound is compounded up and down. Under constant tension, it can meet the requirements of coal mine for material transportation under flame-retardant and static conductive environment by laminating and curing.




 

1.Strength specification:630N/mm~54000N/mm

2.Width specification:800mmm~2200mm

3.Application:It is suitable for use in the environment of flame retardant and antistatic in underground coal mine. It has flame retardant, antistatic, high tensile strength, long service life, small elongation, good grooving performance, good bending resistance and flexibility. It is suitable for long distance, large span, large volume and high speed material transportation.

4.Steel cord conveyor belt specifications:
 

Specification	ST/S630	ST/S800	ST/1000	ST/S1250	ST/S1600	ST/S2000	ST/S2500
Vertical Tensile Strength N/mm	630	800	1000	1250	1600	2000	2500
steel cord diameter mm	3.0	3.3	4.0	4.3	5.0	6.0	7.2
Thickness of top cover mm	5	5	6	6	6	8	8
Thickness of bottom cover mm	5	5	6	6	6	6	8
Width Specification mm	Number of steel wire ropes
	ST/S630	ST/S8000	ST/1000	ST/S1250	ST/S1600	ST/S2000	ST/S2500
800	66	66	55	55	55	55	46
1000	86	86	72	72	72	72	58
1200	106	106	88	88	88	88	71
1400	126	126	105	105	105	105	84
1600	146	146	122	122	122	122	98
1800	166	166	138	138	138	138	111
2000	186	186	155	155	155	155	124
2200	206	206	172	172	172	172	138

Specification	ST/S2800	ST/S3150	ST/S3500	ST/S4000	ST/S4500	ST/S5000	ST/S5400
Vertical Tensile Strength N/mm	2800	3150	3500	4000	4500	5000	5400
steel cord diameter mm	7.5	8.1	8.6	8.9	9.7	10.9	11.3
Thickness of top cover mm	8	8	8	8	8	8.5	9
Thickness of bottom cover mm	8	8	8	8	8	8.5	9
Width Specification mm	Number of steel wire ropes
	ST/S2800	ST/S3150	ST/S3500	ST/S4000	ST/S4500	ST/S5000	ST/S5400
800	46	46	46	-	-	-	-
1000	58	58	58	58	57	52	52
1200	71	71	71	71	68	63	63
1400	84	84	84	84	80	74	74
1600	98	98	98	98	93	86	86
1800	111	111	111	111	104	98	98
2000	124	124	124	124	116	110	110
2200	138	138	138	138	129	121	121

5.Properties of covering adhesive
 

Item		Property index
Tensile strength	MPa  ≥	15
Elongation at break of covering adhesive	%   ≥	350
Wear consumption	mm^3≤	200

6.Safety performance:

Roller friction test: When roller friction test is carried out on each pattern, no flaming combustion or flameless combustion shall occur at any part, and the surface temperature of roller shall not exceed 325 ºC.

Alcohol blowtorch test: For 6 samples with complete covering layer, after removing the blowtorch, the arithmetic mean value of flame burning time and flameless burning time of all samples shall not be greater than 3.0s, and the single value of flame burning time and flameless burning time of each sample shall not be bigger than 10.0s. After removing the alcohol blowtorch, the arithmetic mean value of flame burning time and flameless burning time of all samples shall not be greater than 5.0s, and the single value of flame burning time and flameless burning time of each sample shall not be bigger than 15.0s

Propane combustion test of tunnel: The remaining damage length in the full width should be bigger  than 600mm.

Surface resistance value: The arithmetic mean value of the surface resistance of the top and bottom surfaces of the sample shall not be bigger than 3.0x108 Ω

Our Advantages of conveyor belts

 We are conveyor belt production experts, have a strong R & D technical team, Complete quality control system, from raw material control to product molding, packaging, every step of production are carefully controlled, to ensure to provide customers with high quality conveyor belt products. Let customers rest assured to use.
 

 

FAQ

Q1. Are you a manufacturer?
Yes, we are specialist of conveyor belt production,our factory locate in Shandong Province.,Now we have 6 large production workshops  20,000m²and 300 employees.
 
Q2. What is the lead time?
15 days for 20 feet container order production.
30 days for 40 feet container order production.

Q3. Do you accept customization?
 We accept the production according to the customer's specifications, Because we have R & D team for product design;and accept the customer's trademark for packaging.